Gunn Digital PLL Characteristics

Gunn Digital PLL Characteristics:

(click here for LO board info)
(click here for Gunn & multiplier info = LO tuning ranges)

yellow blocks = units with non-standard bias voltages

PLL# Current location Harmonic mixer Digital board Diplexer board Heater resistor postscript plot 1 postscript plot 2 Repair history
Antenna Receiver revision revision* present?
dpll01 3 300B = 345Rx FMA082 0 0 yes IF Filter Response IF Amplifier Bandpass
dpll02 2 216B = 230Rx FMA080 0 0 ? IF Filter Response IF Amplifier Bandpass
dpll03 4 216C = 230Rx FMA??? 0 0 yes IF Filter Response IF Amplifier Bandpass
dpll04 3 216B = 230Rx FMA077 0 0 yes IF Filter Response IF Amplifier Bandpass
dpll05 NRAO shipped to Tucson n/a 0 1 no box IF not specified no amplifier/diplexer sent
dpll06 6 230Rx FMA083 0 1 yes IF Filter Response IF Amplifier Bandpass
dpll07 4 presently: 650Rx w/RPG-600-1 Zimmerman Gunn, 9.15V target, no datasheet online;
moving to: RPG-600-3 Zimmerman Gunn (crowbar 9.95V) with FMA143 in antenna 1
FMA017 0 1 yes IF Filter Response IF Amplifier Bandpass
dpll08 8 650Rx w/ASIAA Zimmerman Gunn 2001-008 (label=10.4V), 9.4V hardware target, 9.6V software target FMA144 0 1 yes
dpll09 destined for new antenna 2 230Rx (was 300C = 345Rx Antenna 4) FMA145 (was FMA076) 0 1 yes IF Filter Response IF Amplifier Bandpass 109MHz reference connector repaired on 19Jun2002
dpll10 2 300B = 345Rx, target = 9.3V, center = 8.9V? 0 1 ? IF Filter Response IF Amplifier Bandpass
dpll11 4 345GHz Rx, 8.6V target 0 1 yes IF Filter Response IF Amplifier Bandpass
dpll12 destined for antenna 4 345Rx FMA080 0 1 yes IF Filter Response IF Amplifier Bandpass added 750kohm resistor to R35
dpll13 5 650Rx w/ZG-600-2 Zimmerman Gunn, 9.0V target, no datasheet online FMA078 1 1 no IF Filter Response IF Amplifier Bandpass
dpll14 NRAO shipped to Tucson on 25-April-2001 n/a 1 1 no box IF not specified no amplifier/diplexer sent
dpll15 NRAO shipped to Tucson on 25-April-2001 n/a 1 1 no box IF not specified no amplifier/diplexer sent
dpll16 NRAO shipped to Tucson on 25-April-2001 n/a 1 1 no box IF not specified no amplifier/diplexer sent
dpll17 NRAO shipped to Tucson on 25-April-2001 n/a 1 1 no box IF not specified no amplifier/diplexer sent
dpll18 1 1
dpll19 CSO 230GHz Rx, 8.6V target n/a 1 1 no IF Filter Response IF Amplifier Response: RL+3dBm * RL-35dBm
dpll20 CSO 345GHz Rx, 8.6V target bias n/a 1 1 no IF Filter Response IF Amplifier Response: RL-35dBm * RL-17dBm
dpll21 6 690Rx w/ZG-600-2 = 2001-008-11 Zimmerman Gunn, 9.55V target FMA156 1 1 no
dpll22 3 650 Rx w/ ZG-600-1 Zimmerman Gunn (9.2V target) 1 2 no IF Filter Response IF Amplifier Bandpass added 390kohm resistor to R35 to remove Gunn bias ADC offset
dpll23 CSO 850GHz Rx, Zimmerman Gunn, 10.3V target n/a 1 1 no IF Filter Response IF Amplifier Response
dpll24 CSO 650GHz Rx, 8.6V target bias n/a 1 1 no IF Filter Response IF Amplifier Response
dpll25 5 230Rx FMA079 1 1 no IF Filter Response IF Amplifier Response
dpll26 CSO 490GHz Rx, 8.6V target bias n/a 1 1 no IF Filter Response IF Amplifier Response: RL-35dBm * RL-16dBm * RL-3dBm
dpll27 1 230 Rx 1 1 no
dpll28 in receiver lab
dpll29 in receiver lab 8.6V target added 2.2Mohm resistor to R34 to remove Gunn bias ADC offset
dpll30 destined for antenna 4 345Rx (WiseWave, 8.9V target, 9.3V in software) FMA 147 1 no Locked Gunn spectrum added 510kohm resistor to R35 to remove Gunn bias ADC offset
dpll31 destined for antenna 5 345Rx (Carlstrom, 8.6V target) WMA340 1 1 no added 560kohm resistor to R35 to remove Gunn bias ADC offset
dpll32 spare 345 LO chain in Cambridge receiver lab 345Rx (RPG, 8.9V target, 9.2V in software) FMA 146 1 1 no added 300kohm resistor to R35 to remove Gunn bias ADC offset
dpll33 destined for antenna 2 690Rx (9.8V target bias, 10.0V in software) FMA 078 1 1 no Locked Gunn spectrum added 390kohm resistor to R35 to remove Gunn bias ADC offset
dpll34 Cambridge 8.6V target bias 1 1 no added 666kohm resistor to R35 to remove Gunn bias ADC offset
dpll35 Cambridge (for 230GHz antenna 3) 8.6V target bias FMA 153 1 1 no added 624kohm resistor to R35 to remove Gunn bias ADC offset
dpll36 Cambridge 8.6V target bias 1 1 no need to add 6.13kohm resistor to R35 to remove Gunn bias ADC offset
dpll37 Cambridge 8.6V target bias 1 1 no 536kohm added to R35, C30 replaced with ceramic cap
dpll38 shipping to antenna 4 230Rx 8.6V target bias FMA154 1 1 no added 560kohm to R35
dpll39 Cambridge (for 650GHz LO chain with RPG-600-5 to antenna 1) 9.55V target bias 1 1 no resistor added to R35
dpll40 shipping to JCMT 9.6V target bias 1 1 no
dpll41 Cambridge (will not lock) 9.6V target bias 1 1 no
dpll42 Cambridge (works, destined for 400Rx in antenna 5) 9.8V target bias WMA 1 1 no resistor added to R35
dpll43 Cambridge (under construction)
dpll44 Cambridge (under construction)
dpll88 Hawaii (repaired in Cambridge) ? resistor added to R35
dpll89 Hawaii (repaired in Cambridge) 536kohm resistor added to R35
dpll81 in Cambridge awaiting repair needs 400kohm added to R35
dpll87 in Cambridge, lock looks good needs 835 kohm added to R35
dpll90 in Cambridge awaiting repair needs 3.1 Megohm added to R35
dpll92 in Cambridge, lock looks good needs 719 kohm added to R35
dpll93 in Cambridge, lock looks good needs 306 kohm added to R35, and zero offset adjust on notch filter
dpll94 in Cambridge awaiting repair needs 730 kohm added to R35
dpll95 in Cambridge, lock looks good needs 541 kohm added to R35
Hawaii (beam mapper) WM-201
Red blocks are ASIAA units.
*Note: On revision 1 of the diplexer board, you have to cut the trace underneath capacitor pad C2.




Last modified: Fri Feb 16 13:47:01 2007
thunter@cfa.harvard.edu